ATS Timber.
Our own engineered oak with no middle man in the price: the cheapest 14/3 and 15/4 supply & install engineered timber in the country, and the most popular floor we lay.
The 260mm range.
An extra wide plank, and the widest engineered timber plank sold in the Auckland region: 15mm thick with a 4mm oak wear layer. Made for wide open spaces and premium homes, it carries the presence of a statement floor without the movement of Herringbone.
$179/m²Supply & install · 15mm board · 4mm oak wear layer · excl. GST
ATS Timber, installed.
Real jobs, photographed as we left them. Every floor here is one we supplied and laid ourselves.
Victory Road · Laingholm
ATS Timber Raw in the 190mm board, laid through the living spaces. Real oak that brings a warm colour to the room, morning to dusk.
Why ATS Timber.
Ours from the start
ATS Timber is our own line. No middle man sits in the price, and the accountability never leaves our hands, from the mill to the last board laid.
A finish that works hard
Eight coats of brushed lacquer make the surface hardy and scratch resistant, ready for claws, toys and daily traffic.
Honest about water
Water-resistant and approved for kitchens, laundries and bathrooms under the E3 Alternative Solution pathway. Not waterproof; no timber is, and we will not tell you otherwise.
Warm underfoot
Rated for underfloor heating in both widths, so the calm of real oak works with the comfort of a heated slab.
The details.
The numbers that decide most choices. The full specification sheet, warranty and wet area documents live with each colour.
resistant Scratch
resistant Pet
friendly
One board, four jobs.
Cut an ATS Timber board in half and these four layers look back. Each one is there for a reason.
Layer proportions exaggerated for clarity.
UV lacquer
Coat after coat of UV-cured lacquer seals the surface. The finish takes the scuffs, the sunlight and the cleaning, so the oak underneath does not have to.
Oak wear layer
Solid oak, the part you see and walk on. There is enough of it to be sanded and refinished down the years, so the floor gets another life instead of a replacement.
Cross-ply core
Layers of timber glued with the grain alternating. Each ply holds its neighbours still, which is why an engineered board stays flat where solid timber moves with the seasons.
Backing layer
The bottom layer mirrors the pull of the oak on top, keeping the board true through humidity swings and underfloor heating.
Let’s start from the ground up.
Tell us about your space and we’ll come back with a plan and a price.