ATS Design
Collection The collection

Herringbone.

The pattern that made our name, supplied & installed by one team. Two ranges live here: the Herringbone collection of eleven colours, and our own ATS Herringbone, milled in two colours we know intimately.

$179/m²Supply & install · 150 × 600mm engineered timber · 4mm oak wear layer · excl. GST

Herringbone · 11 colours ATS Herringbone · 2 colours
The wider range

The Herringbone collection.

Eleven colours of herringbone engineered timber, 150 by 600 a piece: a French Oak surface over a plantation eucalypt core, water resistant, happy over underfloor heating, and approved for wet areas.

Western herringbone engineered timber sample WesternView colour Natural Clear herringbone engineered timber sample Natural ClearView colour Vintage herringbone engineered timber sample VintageView colour Smouldered herringbone engineered timber sample SmoulderedView colour Slate Grey herringbone engineered timber sample Slate GreyView colour White Wash herringbone engineered timber sample White WashView colour Ash herringbone engineered timber sample AshView colour Caramel herringbone engineered timber sample CaramelView colour Hamptons herringbone engineered timber sample HamptonsView colour Sterling herringbone engineered timber sample SterlingView colour Wheat herringbone engineered timber sample WheatView colour
Our own range

ATS Herringbone.

Two colours cut from the same oak as our ATS Timber favourites: Latte is Latte Luxury cut for herringbone, and West is Light Oak. A 15mm engineered timber with a 4mm wear layer, carrying the 25 year warranty.

Latte herringbone engineered timber sample LatteView colour West herringbone engineered timber sample WestView colour
The case

Why Herringbone.

The sharpest price in the country

Supply & install herringbone at $179/m². Nationwide, nobody beats it, and it is not close.

Laid by our own layers

Herringbone leaves no room for shortcuts. Our own floor layers cut it through complex, awkward, character homes and keep the pattern straight.

Thirteen colours deep

From whitewash to the deepest naturals, there is a herringbone here for every home. Western is the one people ask for most.

Lacquered for real life

Coat after coat of lacquer makes the surface scratch resistant and water resistant, and the collection range is rated for underfloor heating.

At a glance

The details.

The numbers that decide most choices. The full specification sheets and the warranty live with each colour.

Format150 × 600mm engineered timber, both ranges
The build15mm engineered timber with a 4mm oak wear layer
Finish8 coat brushed lacquer (ATS Herringbone) · 7 coat Treffert lacquer (collection)
JoiningTongue and groove
Underfloor heatingYes, the Herringbone collection is rated for it
Wet areasApproved, both ranges
Warranty25 year supply & install
EmissionsE1 rated (ATS Herringbone) · E0 equivalent (collection)
Water
resistant Scratch
resistant Pet
friendly
The cross-section

One board, four jobs.

Cut one of these herringbone boards in half and four layers look back. Each one is there for a reason.

UV lacquer Oak wear layer Cross-ply core Backing layer

Layer proportions exaggerated for clarity.

UV lacquer

Coat after coat of UV-cured lacquer seals the surface. The finish takes the scuffs, the sunlight and the cleaning, so the oak underneath does not have to.

Oak wear layer

Solid oak, the part you see and walk on. There is enough of it to be sanded and refinished down the years, so the floor gets another life instead of a replacement.

Cross-ply core

Layers of timber glued with the grain alternating. Each ply holds its neighbours still, which is why an engineered board stays flat where solid timber moves with the seasons.

Backing layer

The bottom layer mirrors the pull of the oak on top, keeping the board true through humidity swings and underfloor heating.

The first step

Let’s start from the ground up.

Tell us about your space and we’ll come back with a plan and a price.

Contact us