Collection Herringbone · 150 × 600mm oak

Vintage.

Vintage, in herringbone engineered timber, supplied and installed by one team.

$179/m²Supply & install · 15mm board · 4mm oak wear layer · excl. GST

Vintage herringbone engineered timber through the open plan at Ellett Road, Karaka
In your home

Living with Vintage.

Where it shines

One of the four colours people ask for most: the warm side of dark, rich without going black. It carries a big open plan as comfortably as a small bedroom.

What it pairs with

Vintage likes colour around it. At our Karaka job it sat against a sage kitchen and a navy front door and looked right with both, and the gold L Channel Bar was made for boards this rich.

Keeping it right

A mat at the doors and a dry microfibre mop do the routine. It is a deeper colour, so felt pads under anything that moves are cheap insurance, and our Herringbone floor care guide covers the rest.

At a glance

The specification.

Straight from the specification sheet above. If a number matters to your build, the sheet is the authority.

Format150 × 600 × 15mm engineered timber
Wear layer4mm French Oak
CorePlantation eucalypt plywood
JoiningTongue and groove, ends and sides
Finish7 coat Treffert lacquer · subtle brushed · 4 to 6% gloss
Water resistantYes
Underfloor heatingYes
Pack coverage1.08m² per pack
Fire ratingDfl-s1
Emissions0.1 mg/L · E0 equivalent
Water
resistant
Scratch
resistant
Pet
friendly
The first step

Let’s start from the ground up.

Tell us about your space and we’ll come back with a plan and a price.